Bmw Icom Emulator 3.1
CANEMU CAN Filter 3-in-1 Emulator for BMW,Mercedes-Benz,Renault. CANEMU can be used with these cars: 1.Mercedes S-class W221 2007+, new C-class and CLC-class W204 2008+, ML W164 2007+, GL X164 2007+, R-class W251 2007+, E-class W212 with NEC processor. Hi everybody. I heard that somebody already developed bmw icom emulator to work with DCAN or ethernet cable. Maybe someone will share it?
How to configure ICOM, ENET, K+DCAN cable? What’s the difference? Here, cable config manual:Part 1: BMW ICOM configuration manualPart 2: ENET cable configuration manualPart 3: K+DCAN USB cable configuration manualPart 1: configuration manual1 Install patched Ediabas 7.3 from the loader menu and reboot your computer2 Set up your Ethernet adapter as shown below3 Disable your antivirus, firewall and turn off WIFI4 Connect ICOM to car and PC.
Bmw Icom Emulator 3.1 For Sale
Wait for a minute or two5 On loader main screen, click on the relevant brand button for your car/motorcycle. ISTA-P will now launch6 Select your ICOM in connection managerPart 2: configuration manual1 Install patched Ediabas 7.3 from the loader menu and reboot your computer2 Set up your Ethernet adapter as shown below3 Disable your antivirus, firewall and turn off WIFI4 Connect ENET cable to car and PC. Turn on ignition and wait for a minute or two.5 Click on the “ENET ICOM emulator button”.
ZGW search will open6 Enter your car’s ZGW IP and click on “Continue”. Then wait for emulator running notifications to appear7 On loader main screen, click on the relevant brand button for your car. ISTA-P will now launch8 Select ENET in connection managerNote: when ISTA/P asks for ignition ON/OFF during programming use the K15 controls located in the notification area of the taskbar (or the Hotkeys). This must be done in conjunction with the actual car ignition. Default setting is “ONPart 3: USB cable configuration manual1 Install patched Ediabas 7.3 from the loader menu and reboot your computer2 Install your K+DCAN cable and set COM port to COM9. Set latency timer to 1.
Reboot your computer3 Run K+DCAN network configuration tool from the loader menu (may take up to 30 seconds to complete)Then check in network connections that the USB network connection has appearedNote: if the network config tool does not work correctly, use the procedure below (mainly applies to non-English systems)a- Rename the newly created adapter to USB and disableb- Right click on USB-properties. Select Internet Protocol Version 4 (TCP/IPv4)propertiesc- Manually change IP to 169.254.0.8 and subnet mask to 255.255.0.0okclose4 Disable your antivirus, firewall and turn off WIFI5 Plug in your K+DCAN cable to car and PC.6 Click on the “K+DCAN ICOM emulator button”. Then wait for emulator running notifications to appear7 On loader main screen, click on the relevant brand button for your car. ISTA-P will now launch8 Select K+DCAN in connection managerNote: when ISTA/P asks for ignition ON/OFF during programming use the K15 controls located in the notification area of the taskbar (or the Hotkeys). This must be done in conjunction with the actual car ignition. Default setting is “ON”.